Digital 12 Mode Tens, Safety Amplitude Cap, 100mA output, High Quality Electrodes, Compliance Meter, which makes this Our Nicest and most Powerful (100mA) TENS unit. TENS 12MT features include, Dual Channel, 12 modes, Timer, Patient Compliance Meter, New Stronger 100mA output, safety amplitude cover, sturdy metal belt clip, rubber side railings for maximum handling and a premium silver finish. TENS 12MT Specifications: Channels: Dual Channel, isolated between channels Pulse Amplitude: Adjustable, 0-100 mA peak into 500 ohm load each channel. Voltage: 0 - 50V (Load: 500 ohm) Pulse Rate: Adjustable, from 2 to 150 Hz, 1 Hz/step Pulse Width: Adjustable, from 50 to 300 microseconds, 10uS/step Wave Form: Asymmetrical Bi-Phasic Square Pulse 12 Modes: B(Burst), N(Normal), M(Modulation), SD1(Strength Duration), SD2, P1, P2, P3, P4, P5, P6, P7 Burst Mode: Burst rate: Adjustable, 0-5 ? 5Hz; Pulse width adjustable, 50~300uS; Frequency fixed = 100 Hz Normal Mode: The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value. Modulation mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300?S) are fully adjustable. The SD1(Strength-Duration) mode consists of automatic modulation intensity and pulse width in 40% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 40% while the pulse width is increased by 40% in 5 seconds. In the next 5 seconds, the intensity is increased by 40% while the pulse width is decreased by 40%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300?S) are fully adjustable. The SD2(Strength-Duration) mode consists of automatic modulation intensity and pulse width in 70% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 70% while the pulse width is increased by 70% in 5 seconds. In the next 5 seconds, the intensity is increased by 70% while the pulse width is decreased by 70%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300?S) are fully adjustable. P1 (Burst) Mode Burst rate: 2Hz Pulse width: 180μs Frequency fixed : 100 Hz P2 ( Normal) Mode Pulse rate: 100Hz Pulse width: 180μs P3 (Normal) Mode Pulse rate: 2Hz Pulse width: 200μs P4 (Modulation) Mode Pulse rate: 15Hz Pulse width: 180μs P5 (Modulation)Mode Pulse rate: 80Hz Pulse width: 180μs P6 (SD2)Mode Pulse rate: 10Hz Pulse width: 200μs P7 (SD1) Mode Pulse rate: 50Hz Pulse width: 250μ Patient Compliance Meter: This unit can store 60 sets of operation records. Total recorded time is 999 hours. Timer: Adjustable, from 5 to 60 minutes or Continuous. Adjustable in 5 minutes each step. Treatment time countdown automatically. 1 Year Manufacturer Warranty System Includes: Stimulator, Lead Wires, 1 package of high quality Self-Adhesive Electrodes, 9V Battery, Hard Plastic Carrying Case, Instruction Booklet.
Features :
- Hygienic Product : Not Specified
- Allergy : Not Specified
ePower T2 Digital TENS (formerly TENS 12MT) - ePower T2
Digital 12 Mode Tens, Safety Amplitude Cap, 100mA output, High Quality Electrodes, Compliance Meter, which makes this Our Nicest and most Powerful (100mA) TENS unit. TENS 12MT features include, Dual Channel, 12 modes, Timer, Patient Compliance Meter, New Stronger 100mA output, safety amplitude cover, sturdy metal belt clip, rubber side railings for maximum handling and a premium silver finish. TENS 12MT Specifications: Channels: Dual Channel, isolated between channels Pulse Amplitude: Adjustable, 0-100 mA peak into 500 ohm load each channel. Voltage: 0 - 50V (Load: 500 ohm) Pulse Rate: Adjustable, from 2 to 150 Hz, 1 Hz/step Pulse Width: Adjustable, from 50 to 300 microseconds, 10uS/step Wave Form: Asymmetrical Bi-Phasic Square Pulse 12 Modes: B(Burst), N(Normal), M(Modulation), SD1(Strength Duration), SD2, P1, P2, P3, P4, P5, P6, P7 Burst Mode: Burst rate: Adjustable, 0-5 ? 5Hz; Pulse width adjustable, 50~300uS; Frequency fixed = 100 Hz Normal Mode: The pulse rate and pulse width are adjustable. It generates continuous stimulation based on the setting value. Modulation mode is a combination of pulse rate and pulse width modulation. The pulse rate and width are automatically varied in a cycle pattern. The pulse width is decreased by 50% from its original setting in 0.5 second, then the pulse rate is decreased by 50% from its original setting in 0.5 second. Total cycle time is 1 second. In this mode, pulse rate(2-150Hz) and pulse width(50-300?S) are fully adjustable. The SD1(Strength-Duration) mode consists of automatic modulation intensity and pulse width in 40% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 40% while the pulse width is increased by 40% in 5 seconds. In the next 5 seconds, the intensity is increased by 40% while the pulse width is decreased by 40%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300?S) are fully adjustable. The SD2(Strength-Duration) mode consists of automatic modulation intensity and pulse width in 70% range. The intensity is always increasing while the pulse width is decreasing and vice-versa. The intensity is decreased by 70% while the pulse width is increased by 70% in 5 seconds. In the next 5 seconds, the intensity is increased by 70% while the pulse width is decreased by 70%. Total cycle time is 10 seconds. Pulse rate(from 2~150Hz) and pulse width (from 50~300?S) are fully adjustable. P1 (Burst) Mode Burst rate: 2Hz Pulse width: 180μs Frequency fixed : 100 Hz P2 ( Normal) Mode Pulse rate: 100Hz Pulse width: 180μs P3 (Normal) Mode Pulse rate: 2Hz Pulse width: 200μs P4 (Modulation) Mode Pulse rate: 15Hz Pulse width: 180μs P5 (Modulation)Mode Pulse rate: 80Hz Pulse width: 180μs P6 (SD2)Mode Pulse rate: 10Hz Pulse width: 200μs P7 (SD1) Mode Pulse rate: 50Hz Pulse width: 250μ Patient Compliance Meter: This unit can store 60 sets of operation records. Total recorded time is 999 hours. Timer: Adjustable, from 5 to 60 minutes or Continuous. Adjustable in 5 minutes each step. Treatment time countdown automatically. 1 Year Manufacturer Warranty System Includes: Stimulator, Lead Wires, 1 package of high quality Self-Adhesive Electrodes, 9V Battery, Hard Plastic Carrying Case, Instruction Booklet.
Features :
- Hygienic Product : Not Specified
- Allergy : Not Specified
